Optical metrology · Software development · Image processing
Optical metrology · Software development · Image processing
Welcome
Company
News
Exhibitions
Products
Optics Test Equipment
Measuring systems for drawing dies and punches
Drawing die and wire measurement
Contact angle measuring systems
Micro scriber, Wafer contact angle, wafer stress measurement
Straightness, Flatness, Positioning uncertainty by autocollimator
Measuring microscopes, Image processing
Flatness, Bow, Warp, Curvature, Glass thickness
Measuring systems for image intensifier tubes (IIT)
Product videos
Software Download
COMEF
ELCOLEVEL
ELCOWIN
Marx Crypto-Dongle Driver
RTM
SURFTENS
Teamviewer
Teamviewer
Contact
ISO 9001 Certificate
Representatives
privacy policy
Products > Straightness, Flatness, Positioning uncertainty by autocollimator > RTM - measurement of positioning uncertainty of indexing tables
RTM is a software for the measurement of positioning uncertainty of indexing tables using an electronic autocollimator and a polygon mirror as angle reference
Get in touch >
RTM is a Software for measurement of positioning uncertainty and positioning accuracy of round (indexing-) tables according the guidelines of VDI/DGQ 3441, VDI 2617, ISO 230‑2.
The software works in connection with electronic autocollimators and polygon mirrors as angle reference.
Measuring principle
The software RTM serves for the measurement of positioning errors of round tables according VDI/DGQ 3441, VDI 2617, ISO 230-2 in connection with electronic autocollimators and an angle reference master (like polygon mirror).
RTM was developed to meet the needs in machine building industry and is a proven standard software, used in many facilities worldwide.
Example for measuring protocol
In connection with the electronic autocollimator of the ELCOMAT series a measuring accuracy in the sub-arcsec-range can achieved.
RTM - Features
The Software RTM was developed according the recommendations of VDI/DGQ- und ISO 230‑2 guidelines for the evaluation of the rotatory positioning accuracy of any round table and offers the following features:
Definition of Measure- (nominal-) positions on the specimen as full circle or pitch circle with fixed angle difference (also › 360°), or fully free choosable |
optional acquisition of the pitch and/or roll error by 2 autocollimator (X, Y) axis at the same time |
Storing and consideration of the known (by certification) position depending errors of the used angle reference (polygon mirror) |
Support of the linear, pendulum and pilgrim step positioning procedure, optional uni- or bidirectional |
manually, remote controlled or triggered acquisition of measuring values of the autocollimator |
optionally manuyl input of measuring data |
customized solutions or interfaces to any electronic autocollimator possible |
Saving of all measuring parameters in measuring templates for comfortable repetition of measurements |
Evaluation and representation of measuring results according the guidelines of VDI/DGQ 3441, VDI 2617, ISO 230‑2 (others on inquiry implementable) |
Computation and presentation of allaccording the guidelines demanded parameters like systematic deviation, backlash, repeatability, position error, accuracy |
Evaluation (reports) with protocols and graphics on the basis of the used evaluation guideline with freely choosable protocol texts and logo |
Saving and printouts of the measuring reports |
Password protected Software-Service-Mode to avoid Verhinderung accidentally changes of settings and parameters |
Compatibility
Currently, RTM is compatible with all electronic autocollimators of the ELCOMAT series for automatic data acquisition.
The manual input option allows the use in connection with any other autocollimator (visual or electronic).
On customer request we are able to provide interfaces to any other electronic autocollimator.
Download
Software demo version RTM >
RTM data sheet
Examples for use of autocollimators